Product-Germany Deke Industrial (Hong Kong) Limited

Product catalogue

Catalog filtering

RDK-Deep groove ball bearing

- Single row - Open or sealed

- Single row open

- Double row
RDK-Cylindrical roller bearing

- Cylindrical roller bearings with cage

- Cylindrical roller bearings with disc cage or spacers

- Single row full complement cylindrical roller bearings

- Double row full complement cylindrical roller bearings

- High precision cylindrical roller bearings
RDK-Tapered roller bearing

- Single row tapered roller bearings

- Matched tapered roller bearings

- Single row inch tapered roller bearings

- Integral tapered roller bearings
RDK-Thrust ball bearing

- Single direction thrust ball bearings

- Double direction thrust ball bearings
RDK-Angular contact ball bearing

- Single row - Open or sealed design

- Single row - Open design

- Double row - Open or sealed design
RDK-Main shaft bearing

- With steel balls

- Ceramic balls

- With steel balls, sealed

- Ceramic balls, sealed
RDK-Four point contact ball bearing

- Four-point contact ball bearings
RDK-Self aligning ball bearing

- Cylindrical bore - Open or sealed

- Cylindrical or tapered bore - Open or sealed

- Cylindrical or tapered bore - Open

- Wider inner ring

- With adapter sleeve - Open or sealed

- With adapter sleeve - Open
RDK-Drum roller bearing

- Cylindrical or tapered bore

- With adapter sleeve
RDK-Spherical Roller Bearings

- Cylindrical or tapered bore

- With adapter sleeve

- With withdrawal sleeve
RDK-Needle as-cage

- Single row

- Single and double row
RDK-Needle roller bearing with stamping outer ring

- Open, closed, unsealed

- Open, closed, sealed

- Open, full complement needle unit, unsealed
RDK-Machine needle bearing

- Without inner ring

- Without inner ring, open

- With inner ring, open

- Without inner ring, sealed

- With inner ring, sealed

- No flange, without inner ring, open

- No flange, with inner ring, open

- Self-aligning, with/without inner ring

- Needle/thrust ball bearing, without inner ring

- Needle/thrust ball bearing, without inner ring, with or without cover

- Needle/thrust cylindrical roller bearing, without inner ring, with or without cover

- Needle/angular contact ball bearing, with inner ring

- Inner ring, without lubrication hole

- Inner ring, with lubrication hole
RDK-Stamping outer ring needle roller clutch

- Without bearing, knurled or non-knurled

- With bearing configuration, knurled or non-knurled
RDK-Two way thrust angular contact ball bearing

- Double direction thrust angular contact ball bearings
RDK-thrust cylindrical roller bearing

- Thrust cylindrical roller bearing, cage assembly, thrust bearing washer
RDK-Axial Needle and Cage assemblies

- Thrust bearing washer

- Thrust needle roller bearing with centering sleeve

- Used in combination with radial needle roller bearings
RDK-thrust self-aligning roller bearing

- Thrust self-aligning roller bearings
RDK-Cross roller bearing

- Crossed roller bearings
RDK-Roller

- Support type track rollers

- Stud type track rollers

- Ball bearing track rollers
RDK-Screw support bearing

- Thrust angular contact ball bearings

- Needle, thrust cylindrical roller bearings

- Sealing components, precision lock nuts
RDK-High precision bearing with combined load

- Thrust, radial bearings

- Thrust angular contact ball bearings
RDK-Bearing pedestal unit

- Insert bearings (Outer spherical bearings)

- Pillow block units
RDK-Chain drive idler gear tooth unit

- Chain drive, idler sprocket drive

- Idler units
RDK-Fasteners and stops

- Adapter sleeves

- Withdrawal sleeves

- Lock nuts

- Slotted lock nuts

- Lock washers

- Lock plates
RDK-Rolling element

- Steel balls

- Cylindrical rollers
RDK-Grease

- Lithium-based grease No. 2.

- Lithium-based grease No. 2.

- Lithium-based grease No. 2.

- Lithium-based grease No. 2.

- Lithium-based grease No. 2.

RDK-Needle as-cage-Single and double row-Fw 50-95mm

产品图
Model	K95X103X40-ZW	K95X103X30	K90X98X30	K90X98X27	K90X97X20	K85X92X20

产品图
Model	K95X103X40-ZW	K95X103X30	K90X98X30	K90X98X27	K90X97X20	K85X92X20

产品图
Model	K95X103X40-ZW	K95X103X30	K90X98X30	K90X98X27	K90X97X20	K85X92X20

1 2 3 4

产品

product

Product catalogue